Home > TKJ Electronics > Problem with BatchPCB Board

Problem with BatchPCB Board

Hi.
Today I finally recieved the PCB I ordered from BatchPCB about 1Γƒ?½ month ago.
Unfortunately PCB isn’t going to work as there is alot of planes being mistakenly ‘poured’ onto a trace!

EDIT
Today I got the full amount returned from Batch-PCB, including the shipping. Nice guys over there!

Here is some images about the problems…

BatchPCB - Plane 'pouring'


BatchPCB - Plane 'pouring'


BatchPCB - Plane 'pouring'


BatchPCB - Plane 'pouring'

Categories: TKJ Electronics Tags:
  1. Marty McLeod (micro_engineer)
    September 19th, 2010 at 22:56 | #1

    That’s unfortunate about your board.

    My boards have worked, however copper pours have been a source of false failures on my submitted files, pretty much almost every time.

    I’ve noticed the boards I’ve gotten have silkscreen lines with “edges” and often aren’t straight!

    That’s the first time I ever seen it on a PCB.

    But yes, they’re nice guys over there at Sparkfun.

  2. September 21st, 2010 at 17:53 | #2

    Hi Marty.
    My silkscreens have edged/ghost effects too. I think it’s something to do with the manufactor!
    But BatchPCB is a cheap provider too, so I don’t mind the silkscreen edges, just as long as the board works πŸ™‚

  3. October 29th, 2010 at 20:32 | #3

    Daaang. They need a better fab.

  1. No trackbacks yet.